Polycom Provisioning Instructions

   Applies to:

      SoundPoint Models IP321, IP331, IP335, IP450, IP650, IP6000, IP7000

      VVX Models VVX300, VVX400, VVX500, VVX600, VVX1500

These instructions will allow your Polycom phone to connect to the NocTel network.

1 When the phone is first powered up it will display a “loading application” screen.  Press Cancel.

1 On the phone, press Setup > enter the phone’s password. The default is 456.

2 Choose Provisioning Server, and press the Select soft key.

3 Scroll down to Server Type, press the Edit soft key, and arrow right until HTTPS is displayed and press Ok.

4 Below HTTPS enter noctel.com

• Press the alpha-numeric (ASCII) soft key, highlighted in the following illustration, to change entry mode. To enter periods press the star key (*) on your phone’s keypad. If you enter an incorrect number, you can press the backspace/delete button located under the arrow buttons to backspace/delete your entry

5 When finished, press the OK soft key, and then press Exit twice.

6 Choose Save & Reboot and press the Select soft key to reboot the phone and save the new configuration.       

                             *Please note that the phone may reboot multiple times.

You can now place and receive calls.

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.