Step-by-step guide

  1. Navigate to the Algo's IP address on your network. If you do not know the IP address, press the reset button on the device. The current IP address will be read out. Press the reset button again to stop the readout.
  2. Log in to the Algo using the password, "algo" if not yet provisioned with NocTel, or "8675309" if it has been provisoned. 
  3. Click the System tab, then the Firmware tab. 
  4. In the online upgrade section click Check. The system will check for any updates and will return a URL if there is one. 
  5. Open the URL to download the new file.
  6. Chose the From Local Files method in the Customer Upgrade section. 
  7. Click Choose File and navigate to the firmware file you downloaded.
  8. Click Upgrade. 


Updating the firmware can take up to 30 minutes and the device may reboot several times



You can download specific Firmware for Algo products here: https://www.algosolutions.com/firmware-downloads/

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.

Related issues