These instructions will guide you through setting up a Adtran device with a NocTel Trunk. 

Requirements: console access, network access, factory default, a NocTel Trunk.

Step-by-step guide

This guide assumes you are starting with factory default settings, If you need to restore to factory follow the following, otherwise you can skip to the zTerm step.

Password Bypass

• Connect via console to the Adtran Unit
• Power Cycle Adtran Unit
• While it boots back up it will give you a count down in the console, you will have 5 seconds to hit the escape key. Do so.
• At the console, enter: bypass passwords
• At the console, enter: boot

Set Password

• At the console, enter: username admin password passwordhere

1. You can also copy and paste or drag and drop images into your instructions.

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.