Page History

...

1. From the control panel, click on Extensions.
2. Click the Add a New Extension link.
3. Find the Generic SIP device option on the new screen and click Add Device.
4. On the new device page, click the pencil icon to give the extension a name and number. Then click save to confirm the change.
5. Take note of the "How to Configure Your Generic SIP Device" information located at the bottom of the page. 

Configuring the Algo:

• Log into your Algo device's web interface by navigating to its IP address. (

...

• the default password will be admin or algo)
• Navigate to Advanced Settings --> Provisioning page. Set provisioning mode to disabled. Click Save at the bottom of the page. 
  
  Image Modified
  
  
• Navigate to Basic Settings --> SIP

...

• In the SIP Domain (Proxy Server) section enter the SIP Host from the NocTel portal.
  Image Added
  
  
• In the Ring/Alert Mode check the "Monitor "Ring" event on registered SIP extension"
  Image Added
  
  
• In the Ring/Alert Extension section use the generic SIP ID and password from the new extension in the NocTel portal to fill in the following Info:
  • Ring/Alert Extension

...

• • : SIP USER ID
  • Authentication ID: SIP USER ID
  • Authentication Password: SIP Password
    
    Image Modified
    
    
• Click Save. Reboot the device

Adding the Generic SIP extension to the Poly phone ring:

...