Page History

...

1. Navigate to the IP address for the ATA.
2. Login using username: admin and password: admin
   
   
   
3. Click the FXS Port 1 tap at the top of the page. Set the following parameters:
1. Account Active: Yes
2. Primary SIP Server: use the SIP Host list at the bottom of the ATA’s extensions page under “How to configure your generic SIP device.”
3. Prefer Primary SIP Server: No
4. SIP User ID:  use the SIP User ID list at the bottom of the ATA’s extensions page under “How to configure your generic SIP device.”
5. Authentication ID: use the SIP User ID list at the bottom of the ATA’s extensions page under “How to configure your generic SIP device.”
6. Authentication Password: use the SIP Password list at the bottom of the ATA’s extensions page under “How to configure your generic SIP device.”
   
   
   
4. Press Apply at the bottom of the page to save the configuration. The device will take a few minutes to reboot and then will appear online in the NocTel portal. You
5. Connect the analog device in the phone 1 port for the ATA. You can not make and receive calls.

...