Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleOther Connection Options for the Jabra Engage 65

Connecting Poly VVX to Jabra Engage with a Jabra EHS link cable:

  • Log into the Noctel control panel.
  • Click Extensions, and locate the extension you are connecting the headset to in the list, and click on it to bring up the extension’s options page.
  • Click Preferences for Polycom Phone to expand the section.
  • Locate the Headset Type dropdown box and select Jabra.
  • Press the headset button on the Poly phone and press end call. The headset light should be flashing green.

Note on enabling link on first call: From another extension place a call to the extension with the newly attached headset. Wait at least 10 seconds before answering the phone to enable the Jabra Link Adapter. The headset should now be connected and ready for use. 

To use the headset to answer incoming calls the headset button on the Polycom phone needs to be flashing green. 


Connecting a Jabra Engage 65 to a Computer for use with NocTel Go

  1. Plug the supplied micro-USB cable into the micro USB port on the base and into a USB port on your computer.
  2. Plug the base into a power supply.
  3. Open your NocTel Go desktop app. 
  4. Click the headset or speakerphone button to the left of the audio level bar. 
  5. Click Device Settings. On the Devices tab > Headset Mode, use the dropdown boxes for Microphone and Speaker and select Jabra Engage 65. Once set, close the preference window.
  6. On the Go dial pad, ensure that Headset mode is your selected audio mode.


Expand
titlePairing a New Primary Headset to the Jabra Engage 65 Base

A. If the current headset is not within range of the base or is turned off, dock the new headset in the base. It will become the primary headset. The conference and headset status LED on the base will flash to indicate that the new headset is now the primary headset

B. If the current primary headset is within range of the base and is turned on, and the base is not on a call: dock the new headset in the base. Hold the call button (1 sec) on the headset until the conference and headset status LED on the base flashes, indicating that it is now the primary headset.

...