Page History

...

Home Router/Wi-Fi Access Point devices can occasionally get in a bad state, often due to a power outage or loss of connection.

Try rebooting or power cycle your home router:

1. Disconnect the router from its power source.
2. Wait for 5 to 10 seconds for the device to completely power down. 
3. Reconnect the router to power.

STEP 2: Reboot Your Devices

If rebooting your home router does not correct the issue try to reboot the devices experiencing the issue. If you have a Wi-Fi access point that is separate from your main router, reboot the access point.

STEP 3: Bypass your Home Router. 

You can narrow down what may be causing the issue by bypassing your home router. 

1. Disconnect the NocTel Fiber lead Ethernet cable from your home router. 
2. Connect the NocTel lead Ethernet cable directly to your computer's network port/jack.
3. In your computer network setting, ensure Wi-Fi is off, and you are connected to the Ethernet option.
4. Open a browser and check the connection by navigating to a website or performing a google search.
5. Possible Outcomes:
1. Being able to navigate to a website by bypassing your home router would indicate that there is an issue with the router, and NocTel Fiber's services are operating. 
2. Not being able to navigate to a website when the home router is bypass might point to a service affecting issue at NocTel Fibe

STEP 4: Check NocTel Fiber's Status.

If the NocTel Fiber Network is experiencing an issue our team may already be aware of it and working to restore service. You can check NocTel Fiber's status by one of the following methods;

• Visite status.noctel.com - 
• Call us at 

Related articles

...