...
- In the NocTel control panel navigate to Extensions, and then select the extension the headset will be used on.
- Click the arrow > for the Preference for Poly Phone to expand it. (if you don't see the section click the gear icon to unhide advance options).
- Change the Headset Type filed to Jabra using the drop down box. Click outside the box to save the change.
Connecting the Engage 65 to the Poly Phone via USB.
Info | ||
---|---|---|
| ||
Before connecting the Engage to a Poly extension, the extension's headset type must be changed in the control panel. See the above steps to complete this. |
- Connect the Jabra headset to the base and connect the base to power.
- Connect the included USB cable from the Jabra base to the USB on the VVX (250, 350, or 450).
- Press the headset button on the VVX and then use the softkey to end the active call. The headset button should now be flashing green. You can now answer calls via the headset.
Additional Information:
Expand | ||
---|---|---|
| ||
Power on: Press the call button on the headset or undock the headset from the base Power off: Hold the calls button for 4 seconds Answer Call: Press the call button, undock the headset, or tap on the green call button on the base End Call: Press the call button on the headset, dock the headset, or tap the read headset button on the base. Reject call: double press the call button or tap the red headset button on the base Adjust Volume: Press the volume headset buttons up or down Mute/Un-mute: Press the mute button on the end of the mic boom. |
Expand | ||
---|---|---|
| ||
Connecting Poly VVX to Jabra Engage with a Jabra EHS link cable:
Note on enabling link on first call: From another extension place a call to the extension with the newly attached headset. Wait at least 10 seconds before answering the phone to enable the Jabra Link Adapter. The headset should now be connected and ready for use. Connecting a Jabra Engage 65 to a Computer for use with NocTel Go
|
Expand | ||
---|---|---|
| ||
A. If the current headset is not within range of the base or is turned off, dock the new headset in the base. It will become the primary headset. The conference and headset status LED on the base will flash to indicate that the new headset is now the primary headset B. If the current primary headset is within range of the base and is turned on, and the base is not on a call: dock the new headset in the base. Hold the call button (1 sec) on the headset until the conference and headset status LED on the base flashes, indicating that it is now the primary headset. |
Expand | ||
---|---|---|
| ||
|
...
Expand | ||
---|---|---|
| ||
Note that the following will reset all the headset and the base settings.
|
Expand | ||
---|---|---|
| ||
|
Jabra Engage 65 Documents
...