NocTel Talk Documentation
Page tree

Versions Compared

Old Version 7

changes.mady.by.user Joey Macaluso

Saved on

compared with

New Version Current

changes.mady.by.user Joey Macaluso

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Connect the Jabra headset to the base and connect the base to power.
  • Connect the included USB cable from the Jabra base to the USB on the VVX (250, 350, or 450).
  • Press the headset button on the VVX and then use the softkey to end the active call. The headset button should now be flashing green. You can now answer calls via the headset.

Additional Information:

Expand
titleJabra Engage 65 Basic Call Functions

Power on: Press the call button on the headset or undock the headset from the base

Power off: Hold the calls button for 4 seconds

Answer Call: Press the call button, undock the headset, or tap on the green call button on the base

End Call: Press the call button on the headset, dock the headset, or tap the read headset button on the base.

Reject call: double press the call button or tap the red headset button on the base

Adjust Volume: Press the volume headset buttons up or down

Mute/Un-mute: Press the mute button on the end of the mic boom.

...

Expand
titlePairing a New Primary Headset to the Jabra Engage 65 Base

A. If the current headset is not within range of the base or is turned off, dock the new headset in the base. It will become the primary headset. The conference and headset status LED on the base will flash to indicate that the new headset is now the primary headset

B. If the current primary headset is within range of the base and is turned on, and the base is not on a call: dock the new headset in the base. Hold the call button (1 sec) on the headset until the conference and headset status LED on the base flashes, indicating that it is now the primary headset.

Expand
titleNotes on Charging the Jabra Engage 65


  • Plug the base into a power supply using the supplied power cable. (It is recommended to connect the telephone or computer cables before connecting the base to a power supply.)
    Image Added
  • To charge, dock the headset in a base connected to power. The Status LED on the headset and the battery icon on the base will pulse to indicate charging.
  • The stereo/mono headset has up to 13 hours of battery.
  • All headset takes approximately 1.5 hours to fast charge to full. 40% of the battery will charge in 30 minutes

...

Expand
titleHow to Reset a Jabra Engage 65

Note that the following will reset all the headset and the base settings. 

  1. Dock the headset in the base
  2. Press and hold the Answer Call and the End Call button on the base for 3 seconds. The headset and the base will reboot. All settings will return to their default values.
Expand
titleCare Instructions
  • It is recommended to keep the headset between -5°C and 45°C (23°F and 113°F).
  • Do not store the headset for extended periods of time without recharging the battery (max. three months).
  • If the headset or base becomes dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.

Jabra Engage 65 Documents

...