Provisioning Algo Devices

Step-by-step guide

1. Navigate to Algo's IP address. If you do not know your device's IP address, press the reset button on the device. The IP address will be read out. Press the reset button again to stop the readout. 
2. Log into your Algo device's web interface (the default password is algo).
3. Navigate to Advanced Settings --> Provisioning page.
4. Set the Server Method to Static. Enter noctel.com for the server. Select the HTTPS download method.
5. Press the Save button at the bottom of the page.
6. Click the Reboot button to reboot your device. The speaker will reboot, connect to NocTel.com to receive its configuration, upgrade if necessary, and then be operational within a matter of 2-3 minutes.

Related articles

• Page:
  Connecting an Algo 8301 to an Analog Paging System
• Page:
  Use Cases: Algo 8301 Paging Adapter and Scheduler
• Page:
  Use Cases: Algo Speaker & Visual Alerters
• Page:
  Common Paging Issues
• Page:
  Updating Algo Firmware