Provisioning and Setup of Grandstream HT801 or HT802 ATA

The Grandstream HT801 and HT802 are analog telephone adaptor (ATA) with 1 or 2 Foreign Exchange Subscriber (FXS) ports for connecting an analog phone to your NocTel Talk Host VoIP system.

Outbound and Ext to Ext Dialing

When making an outbound call from the analog device connected to the Grandstream HT802 you must dial your NocTel account exit code + the 10 digit phon number.
Direct extension to extensions dialing does not require the exit code.
Dialing emergency service (911): dial 911 no exit code is needed.

Add a Grandstream Extension

In the NocTel portal, click Extensions > Add a new Extension.
In the Grandstream section and click add device.
On the Grandstream Device Provisioning page complete the following field in step 3:
1. Device MAC: the phone's 12-digit MAC address. The MAC address can be found on the bottom of the device.
2. Ext. #: Give the extension a distinct extension number not currently in use in your account.
3. Line: For all standard applications, leave as 1st
4. Extension Name: Enter a descriptive name for the extension.
Click Submit.

Finding the Grandstream ATA's IP Address

Connect the Grandstream to power using the included Micro USB power adaptor.
Connect the Grandstream to an active network connection in the blue Internet port.
Connect an analog phone to Phone 1 port.
On the connected phone, dial ***
When prompted for a menu option, dial 02. Take note of the IP address provided.

NOTE: the above image shows the HT802 model. The HT801 has only one FXS port.

Accessing the Grandsteam's Web Interface and Provisioning

Navigate to the IP address for the ATA.
Login using username: admin and password: admin
Click the Advanced Settings tab at the top of the page.
Locate the Firmware Upgrade and Provisioning section. In the Config Server Path field, enter: noctel.com
Click Apply at the bottom of the page.
Click the Advanced Settings tab to return to the page, scroll to the bottom and click Reboot. The device will provision automatically; the process can take several minutes before the extension shows as online in the control panel.

Grandstream ATA LED Pattern Description

Factory Resetting a Grandstream ATA

Using the Reset Button

To reset default factory settings using the reset button please follow the steps above:

1. Unplug the Ethernet cable.
2. Locate the reset hole on the back panel of your HT801/HT802.
3. Insert a pin in this hole and press for about 7 seconds.
4. Take out the pin. All unit settings are restored to factory settings.

Using the IVR Command

Reset default factory settings using the IVR prompt:

1. Dial *** for the voice prompt.
2. Enter 99 and wait for the “reset” voice prompt.
3. Enter the encoded MAC address (Look below for how to encode the MAC address).
4. Wait 15 seconds and the device will automatically reboot and restore factory settings.

Encode the MAC Address:

1. Locate the MAC address of the device. It is the 12-digit HEX number on the bottom of the unit.
2. Key in the MAC address. Use the following mapping:

Key	Mapping
0*9	0-9
A	22 (press the “2” key twice, and “A” will show on the LCD)
B	222
C	22222
D	33 (press the “3” key twice, and “D” will show on the LCD)
E	333
F	3333

For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”.

Reset from HT802's Web Interface

Reset from Web Interface (Reset Type):

1. Access your HT801/HT802 UI by entering its IP address in your favorite browser. 2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings >> Reset Type.

5. Press the Reset button (after selecting the reset type):

Full Reset: This will make a full reset.
ISP Data: This will reset only the basic settings, like IP mode, PPPoE, and Web port.
VOIP Data: This will reset only the data related to a service provider like SIP server, sip user ID, provisioning and others.

Resetting Notes

Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
If the HT801/HT802 was previously locked by your local service provider, pressing the RESET button will only restart the unit. The device will not return to factory default settings.

Grandstream Documentation

Device	Document
HT801	Data Sheet (HT801)
HT802	Data Sheet (HT802)
HT801/HT802	User Guide
HT801/HT802	Admin Guide

Page tree