Provisioning a Yealink W76P Wireless Phone

Use this guide to add a Yealink W76P wireless phone and provision it for you with NocTel

Add a New Yealink Extension

From the control panel, click on Extensions.
Then click on the Add a New Extension link.
The following screen will present a selection of extension types. Locate the Yealink IP phone and click Add Device.
Add the device by entering the required information on the new page in step 3:
1. Device MAC (located on the base unit)
2. Ext. #: an unused extension number in your account
3. Extension Name: descriptive name
Click Submit.

Connect the Yealink base to power and an active network connection.
On the handset press: Ok (center arrow pad) > Status > Base. Scroll down and note the IPv4 address.
In a browser navigate to the IP address.
Login with the default Username (admin) and default Password (admin)
Set a new admin password by clicking on the link at the top of the page in the Warning popup. We recommend 8675309 to correspond with other NocTel device passwords.
Login again.
Navigate to Account > Register.
Set the Line Active to enabled.
On the Register page, enter the following information in the corresponding fields from the extension's option page:
1. Display Name: Yealink extension number
2. Register Name: SIP User ID
3. Username: SIP User ID
4. Password: SIP Password
5. Server Host: SIP Host
Click Confirm.